380v Carton Stripping Machine For Cardboard Reducing Artificial Waste

Carton Stripping Machine Automatic Stripping Machine For Cardboard

Product Advantages

1. reduce artificial waste
2. reduce manpower waste when damage to the product
3. 30%-50% higher production efficiency
4. the more holes, the higher efficiency cos it’s done in one go. Quite different from man hand waste stripping one by one. Special mould and needles are available upon demands.
5. it moves an waste more than 40-70 cartons on the hole, and can accurately remove area smaller than 100 square meter(25mmx4mm rectangle holes or ∮11 circular hole) position. Which include installation between the rack on both sides of the workbench has a blanking hole, connecting the rack installation cylinder, cylinder piston rod through the bracket and the stamping connection, stamping parts are installed on the punch. By pressing left and right before and after the two short board and two long plate connection, the installation punch through the stamping connection rod on activities.

How To Use

1) according to die-finished product specifications, the size of the production of wooden bottom template. The size of each side of the bottom of the mold is 3mm to 5mm smaller than that of the die-cut product, and the thickness of the single bottom mold is 15mm. Five identical wooden bottom molds are made for each die-cutting product, Block the bottom template fixed together, the total height of about 75mm

2) will be fixed at the bottom of a wooden template in the open on the bottom plate , the first fixed a die-off pair of open proofing on the bottom plate, set the position and then put the wood template on proof Center position and fixed well

3) in the open front of the rule and side gauge fixed position of the wooden block, you can carry out the work of cleaning up.

4) according to the quality of the die-cutting quality, a certain number of die-cut proofs in the wood template on a one-time positioning installed , the total thickness of proofs is generally 40 ~ 70mm (easily knock the waste proofs can be more Put some) with a hammer in the sample area on the waste area of the major connections percussion, the waste fell into the hole in the bottom of the template, and then receive the finished product, and then clean up the waste.