Automatic Corrugated Sheet Cutting Machine , Paper Rewinding Machine Run Smoothly

Corrugated Automatic Sheet Paper Cutting And Rewinding Machine

Sumarrize

The slitter is used to cut all kinds of drum materials. The machine is equipped with a round knife and a straight knife to cut different materials respectively. Through cutting narrow width materials and materials with different difficulties, the slitter is divided into surface winding and center winding, and longitudinal cutting is adopted.

Equipment features

1. Centralized panel operation, integrated circuit control. All parts of the machine are centralized in panel operation control.

2. Main functions of the panel: A. spindle speed adjustment B. winding length setting C. unwinding tension adjustment D. winding tension setting E. start. Stop button.

3. The cutter adopts upper and lower round cutters. The lower cutter pad can be changed according to different cutting width, and the cutting width can be adjusted to achieve high quality cutting quality.

Principle

1. The paper Slitter shall cut the whole roll or the whole sheet of raw materials with fixed length, such as plastic packaging materials, packaging cartons, steel plates, films, leather, wood chips, etc., which shall be controlled by fixed length slitting.

2. The cutting length can be set continuously. If there is any error in the actual cutting length, it is easy to calibrate by setting parameters.

3. The slitting control of the paper Slitter is divided into static and dynamic slitting: stop the machine accurately when the set length reaches, then static slitting processing, restart the operation after slitting; when the set length reaches, send the slitting signal without stopping, and the slitter will conduct dynamic slitting processing in the process of material movement.

Technical parameter